System Professional Colour Reset 3 Easy Steps Kit
Color Reset is a revolution in hair dye removal. This three-step formula reverses the hair coloring process.
Because Colour Reset does not lighten or remove natural pigment from the hair you can apply freely without separating from colored hair. Apply Colour Reset with a tint bowl and brush or sponge. Begin applying onto the areas of the hair which need hair color correction. Use a large toothed plastic tangle comb to separate sections and ensure even distribution.Very long and thick hair may require more product.
Step 2 : Development & Rinsing Once evenly applied, process for up to 60 minutes, depending on the type, history and depth of color. You must ensure the room is not cold and there are no drafts. If you have long or thick hair a good tip is to cover in cling film. This will trap the heat and accelerate removal.
There is no need to check continually because Colour Reset will not lighten or damage the hair. Once the processing time has elapsed, the hair will now be ready for the rinsing stage.
Rinse for at least 5 minutes and up to 10 minutes for longer hair. It is important to keep directing the water into the hair and running your fingers through it.
Step 3 : Buffer & Rinsing After you have rinsed the hair, apply 25ml of Buffer. Lather up well and leave for 1 minute to absorb.
After the minute continue rinsing the hair with warm water for at least another 5 minutes. After rinsing and buffering thoroughly apply a further 25ml of Bugger. Lather and rinse thoroughly just as you would a regular shampoo. After all traces of the buffer have been successfully rinsed from the hair you many conclude and towel dry.
This Kit Includes :
- 1x250 ml Activator
- 1x250 ml Remover
- 1x250 ml Buffer
How It Works :
- Removes all artificial color safely with ease.
- Does not lift natural depth or tone virgin hair.
- So safe there is no need to check or stand over.
- Enables re-color same day.
- Includes argan oil to help improve hairs condition.
- Restores your hair’s natural shine and luster.
- Removes product build-up.
Directions:
Step 1 : Mixing & Application Measure and pour 50ml of Activator and 50ml Remover into a plastic tint bowl and mix thoroughly using a plastic whisk, spoon or spatula.Because Colour Reset does not lighten or remove natural pigment from the hair you can apply freely without separating from colored hair. Apply Colour Reset with a tint bowl and brush or sponge. Begin applying onto the areas of the hair which need hair color correction. Use a large toothed plastic tangle comb to separate sections and ensure even distribution.Very long and thick hair may require more product.
Step 2 : Development & Rinsing Once evenly applied, process for up to 60 minutes, depending on the type, history and depth of color. You must ensure the room is not cold and there are no drafts. If you have long or thick hair a good tip is to cover in cling film. This will trap the heat and accelerate removal.
There is no need to check continually because Colour Reset will not lighten or damage the hair. Once the processing time has elapsed, the hair will now be ready for the rinsing stage.
Rinse for at least 5 minutes and up to 10 minutes for longer hair. It is important to keep directing the water into the hair and running your fingers through it.
Step 3 : Buffer & Rinsing After you have rinsed the hair, apply 25ml of Buffer. Lather up well and leave for 1 minute to absorb.
After the minute continue rinsing the hair with warm water for at least another 5 minutes. After rinsing and buffering thoroughly apply a further 25ml of Bugger. Lather and rinse thoroughly just as you would a regular shampoo. After all traces of the buffer have been successfully rinsed from the hair you many conclude and towel dry.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
System Professional Colour Reset 3 Easy Steps Kit
System Professional Colour Reset 3 Easy Steps Kit
Color Reset is a revolution in hair dye removal. This three-step formula reverses the hair coloring process.
Because Colour Reset does not lighten or remove natural pigment from the hair you can apply freely without separating from colored hair. Apply Colour Reset with a tint bowl and brush or sponge. Begin applying onto the areas of the hair which need hair color correction. Use a large toothed plastic tangle comb to separate sections and ensure even distribution.Very long and thick hair may require more product.
Step 2 : Development & Rinsing Once evenly applied, process for up to 60 minutes, depending on the type, history and depth of color. You must ensure the room is not cold and there are no drafts. If you have long or thick hair a good tip is to cover in cling film. This will trap the heat and accelerate removal.
There is no need to check continually because Colour Reset will not lighten or damage the hair. Once the processing time has elapsed, the hair will now be ready for the rinsing stage.
Rinse for at least 5 minutes and up to 10 minutes for longer hair. It is important to keep directing the water into the hair and running your fingers through it.
Step 3 : Buffer & Rinsing After you have rinsed the hair, apply 25ml of Buffer. Lather up well and leave for 1 minute to absorb.
After the minute continue rinsing the hair with warm water for at least another 5 minutes. After rinsing and buffering thoroughly apply a further 25ml of Bugger. Lather and rinse thoroughly just as you would a regular shampoo. After all traces of the buffer have been successfully rinsed from the hair you many conclude and towel dry.
This Kit Includes :
- 1x250 ml Activator
- 1x250 ml Remover
- 1x250 ml Buffer
How It Works :
- Removes all artificial color safely with ease.
- Does not lift natural depth or tone virgin hair.
- So safe there is no need to check or stand over.
- Enables re-color same day.
- Includes argan oil to help improve hairs condition.
- Restores your hair’s natural shine and luster.
- Removes product build-up.
Directions:
Step 1 : Mixing & Application Measure and pour 50ml of Activator and 50ml Remover into a plastic tint bowl and mix thoroughly using a plastic whisk, spoon or spatula.Because Colour Reset does not lighten or remove natural pigment from the hair you can apply freely without separating from colored hair. Apply Colour Reset with a tint bowl and brush or sponge. Begin applying onto the areas of the hair which need hair color correction. Use a large toothed plastic tangle comb to separate sections and ensure even distribution.Very long and thick hair may require more product.
Step 2 : Development & Rinsing Once evenly applied, process for up to 60 minutes, depending on the type, history and depth of color. You must ensure the room is not cold and there are no drafts. If you have long or thick hair a good tip is to cover in cling film. This will trap the heat and accelerate removal.
There is no need to check continually because Colour Reset will not lighten or damage the hair. Once the processing time has elapsed, the hair will now be ready for the rinsing stage.
Rinse for at least 5 minutes and up to 10 minutes for longer hair. It is important to keep directing the water into the hair and running your fingers through it.
Step 3 : Buffer & Rinsing After you have rinsed the hair, apply 25ml of Buffer. Lather up well and leave for 1 minute to absorb.
After the minute continue rinsing the hair with warm water for at least another 5 minutes. After rinsing and buffering thoroughly apply a further 25ml of Bugger. Lather and rinse thoroughly just as you would a regular shampoo. After all traces of the buffer have been successfully rinsed from the hair you many conclude and towel dry.
$20.79
Original: $59.40
-65%System Professional Colour Reset 3 Easy Steps Kit—
$59.40
$20.79Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Color Reset is a revolution in hair dye removal. This three-step formula reverses the hair coloring process.
Because Colour Reset does not lighten or remove natural pigment from the hair you can apply freely without separating from colored hair. Apply Colour Reset with a tint bowl and brush or sponge. Begin applying onto the areas of the hair which need hair color correction. Use a large toothed plastic tangle comb to separate sections and ensure even distribution.Very long and thick hair may require more product.
Step 2 : Development & Rinsing Once evenly applied, process for up to 60 minutes, depending on the type, history and depth of color. You must ensure the room is not cold and there are no drafts. If you have long or thick hair a good tip is to cover in cling film. This will trap the heat and accelerate removal.
There is no need to check continually because Colour Reset will not lighten or damage the hair. Once the processing time has elapsed, the hair will now be ready for the rinsing stage.
Rinse for at least 5 minutes and up to 10 minutes for longer hair. It is important to keep directing the water into the hair and running your fingers through it.
Step 3 : Buffer & Rinsing After you have rinsed the hair, apply 25ml of Buffer. Lather up well and leave for 1 minute to absorb.
After the minute continue rinsing the hair with warm water for at least another 5 minutes. After rinsing and buffering thoroughly apply a further 25ml of Bugger. Lather and rinse thoroughly just as you would a regular shampoo. After all traces of the buffer have been successfully rinsed from the hair you many conclude and towel dry.
This Kit Includes :
- 1x250 ml Activator
- 1x250 ml Remover
- 1x250 ml Buffer
How It Works :
- Removes all artificial color safely with ease.
- Does not lift natural depth or tone virgin hair.
- So safe there is no need to check or stand over.
- Enables re-color same day.
- Includes argan oil to help improve hairs condition.
- Restores your hair’s natural shine and luster.
- Removes product build-up.
Directions:
Step 1 : Mixing & Application Measure and pour 50ml of Activator and 50ml Remover into a plastic tint bowl and mix thoroughly using a plastic whisk, spoon or spatula.Because Colour Reset does not lighten or remove natural pigment from the hair you can apply freely without separating from colored hair. Apply Colour Reset with a tint bowl and brush or sponge. Begin applying onto the areas of the hair which need hair color correction. Use a large toothed plastic tangle comb to separate sections and ensure even distribution.Very long and thick hair may require more product.
Step 2 : Development & Rinsing Once evenly applied, process for up to 60 minutes, depending on the type, history and depth of color. You must ensure the room is not cold and there are no drafts. If you have long or thick hair a good tip is to cover in cling film. This will trap the heat and accelerate removal.
There is no need to check continually because Colour Reset will not lighten or damage the hair. Once the processing time has elapsed, the hair will now be ready for the rinsing stage.
Rinse for at least 5 minutes and up to 10 minutes for longer hair. It is important to keep directing the water into the hair and running your fingers through it.
Step 3 : Buffer & Rinsing After you have rinsed the hair, apply 25ml of Buffer. Lather up well and leave for 1 minute to absorb.
After the minute continue rinsing the hair with warm water for at least another 5 minutes. After rinsing and buffering thoroughly apply a further 25ml of Bugger. Lather and rinse thoroughly just as you would a regular shampoo. After all traces of the buffer have been successfully rinsed from the hair you many conclude and towel dry.
